Planet CS-5800 User Manual Download Page 130

Page: 130 / 142

Gigabit Content Security Router User’s Manual

Following is the description of the two different modes.

Item

Description

Operation-Master Mode

Indicates the master device will operate for all outbound links. When the master

device fails transmitting, the backup device will take over.

Status

“Status- Normal” indicates the device operates well.

Status of the backup

device

Indicates status of backup device. If the status is normal, administrators can login

the device remotely to manage. (Remote Management should be enabled).

“Status- Abnormal” indicates the backup device can not be detected or does

exist, and need to inspect the backup device actual status.

Item

Description

Operation-Backup

Mode

Indicates the backup device will take over when the master fails transmitting.

WAN and LAN IP setting in backup device should be the same as those of master

device. The backup device should not be in charge of network transmitting and

DHCP server.

If the original LAN IP addresses are issued by Master device, DHCP server

※

- 124 -

Summary of Contents for CS-5800















































































































































Search results

Summary of Contents for CS-5800

Reviews:

Related manuals for CS-5800

Brands by name

Popular brands

Planet CS-5800, User Manual

Search results

Summary of Contents for CS-5800

Reviews:

Related manuals for CS-5800

Brands by name

Popular brands