User’s Manual of WGSW-24040 / WGSW-24040R
Key Parameters
Key configuration are discribed as below:
Tag
Value of Tag field can be 'Any', 'Untag' or 'Tag'
VID
Valid value of VLAN ID can be any value in the range 1-4095 or 'Any'; user
can enter either a specific value or a range of VIDs
PCP
Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or
range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'
DEI
Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1
or 'Any'
SMAC
Source MAC address: 24 MS bits (OUI) or 'Any'
DMAC Type
Destination MAC type: possible values are unicast(UC),
multicast(MC), broadcast(BC) or 'Any'
Frame Type
Frame Type can have any of the following values
1.
Any
2.
Ethernet
3.
LLC
4.
SNAP
5.
IPv4
6.
IPv6
Note: all frame types are explained below.
Any
Allow all types of frames.
Ethernet
Ethernet Type
Valid ethernet type can have value within 0x600-0xFFFF or 'Any'
but excluding 0x800(IPv4) and 0x86DD(IPv6), default value is 'Any'.
LLC
SSAP Address
Valid SSAP(Source Service Access Point) can vary from 0x00 to
0xFF or 'Any', the default value is 'Any'
DSAP Address
Valid DSAP(Destination Service Access Point) can vary from
0x00 to 0xFF or 'Any', the default value is 'Any'
Control Address
Valid Control Address can vary from 0x00 to 0xFF or 'Any', the
default value is 'Any'
SNAP
PID
Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any',
default value is 'Any'
IPv4
Protocol
IP protocol number: (0-255, TCP or UDP) or 'Any'
Source IP
Specific Source IP address in value/mask format or 'Any'. IP and Mask
are in the format x.y.z.w where x, y, z, and w are decimal numbers between 0 and
255. When Mask is converted to a 32-bit binary string and read from left to right,
all bits following the first zero must also be zero
DSCP
Diffserv Code Point value(DSCP): It can be specific value, range of value
or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or
AF11-AF43
IP Fragment
IPv4 frame fragmented option: yes|no|any
198
Summary of Contents for WGSW-24040
