Planet Networking & Communication WGSW-24040, User Manual

Page: 32 / 576

User’s Manual of WGSW-24040 / WGSW-24040R
10/100
LNK/ACT
Orange
Lights
to indicate the port is running in
10/100Mbps
speed and successfully established.
Blink
: indicate that the switch is actively sending or receiving data over that port.
■
Per 100/1000Base-X SFP Interfaces
LED Color Function
1000 Green
Lights
to indicate that the port is operating at
1000Mbps
.
Off
to indicate the port is operating at 100Mbps or no link.
LNK/ACT Orange
Lights
to indicate the port is successfully established.
Blink
: indicate that the switch is actively sending or receiving data over that port.
2.1.3 Switch Rear Panel
The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz. Figure 2-4 & Figure 2-5 shows the rear panel of these Managed Switches
WGSW-24040 Rear Panel
Figure 2-4
Rear panel of
WGSW-24040
WGSW-24040R Rear Panel
Figure 2-5
Rear panel of
WGSW-24040R
■
AC Power Receptacle
For compatibility with electric service in most areas of the world, the Managed Switch’s power supply automatically adjusts
to line power in the range 100-240VAC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptalbe on the rear panel of the Managed Switch. Plug the other
end of the power cord into an electric service outlet then the power will be ready.
Power Notice:
The device is a power-required device, it means, it will not work till it is powered. If your networks should
active all the time, please consider using UPS (Uninterrupted Power Supply) for your device. It will
prevent you from network data loss or network downtime.
In some area, installing a surge suppression device may also help to protect your Managed Switch from
being damaged by unregulated surge or current to the Switch or the power adapter.
32