5 Mega-pixel Vandalproof IR PoE IP Camera
ICA-E5550V
31
3.4 Configuration
To configure any of the camera settings, go to the Setup menu by pressing the following button
on the Live View page:
- Go to Setup
The left side of the Setup page contains the list of Setup
items.
The exact content of the menu list varies for
each camera, depending on the actual
capabilities of each camera. This manual,
however, is designed to explain all the
possible functions.
Several items in the Setup page are divided into groups, such as Network, IP Settings, etc. You
can expand the groups to see the sub-items by pressing the [+] button.
The following chapters of this manual explain each Setup item separately. The chapters are
listed in the same order as the list of Setup menu items.
3.5 Host Setup
The “Host Setup” section allows the administrator to define the name of the camera and
preferred user interface language.
3.5.1 Host
Parameters Description
Host Name
Host Name is used to identify the camera by a DHCP server. In some
networks with very strict security policy, it is required that all the network
devices should have their host name, and when the devices attempt to
access the network by requesting an IP address from a DHCP server, the
DHCP server would check if the host name is among the allowed devices.
On this page, it is possible to edit the Host Name. To actually include the
Host Name in DHCP discovery packet sent from a camera, please go to IP
Settings and make sure the device is in Dynamic IP Address mode and
“Use host name” is checked.
Language
Language selection under Host has the same purpose as the one on the
login page of Web Configuration.
Camera Name
Camera Name is used to identify the device by Video Management System
or by Software Tools. Usually, upon installation of the camera, the actual
installation location is used as an easy-to-remember Camera Name, such
