5 Mega-pixel Vandalproof IR PoE IP Camera
ICA-E5550V
39
To use SNMP, just
enable
SNMP function in the camera (SNMP agents) and run SNMP
management software in server (NMS: Network Management Station) to connect to the
devices.
The SNMP agent supports versions 1, 2 and 3. SNMP v1 is the initial implementation of SNMP.
SNMP v2 is proposed to enhance the performance of management, such as the
communication of server and devices, the confirmation of information delivery and receipt.
Primary additions in SNMP v3 concern security and remote configuration enhancements.
SNMP v1/v2
uses “Community” name as password to authenticate identity. “Read Community”
is the password for server to get information from devices. “Write Community” is the password
for server to edit values on devices. The default is “public” for Read Community and “write” for
Write Community. Of course, you can set any other password as your read/write community.
You can enable v1, v2 or both. Click “
Apply
” after you’ve completed the setup.
The security method of
SNMP
v3
uses account/password for authentication. “Security Name”
is the account name to be used with your “Password”. The default security name is “public”
and the password must be at least 8 characters long. You also can set any other security name
or password. Click “
Apply
” after you’ve completed the setup.
SNMP function is now enabled. You may now install and run the SNMP management software
on computer server.
SNMP Trap Usage:
SNMP traps enable notifications from devices. Devices may send message to the
management server whenever significant events occur such as cold start, warm start and