5 Mega-pixel Vandalproof IR PoE IP Camera
ICA-E5550V
67
Notification messages
may be sent to either an email or a HTTP CGI server. If sent to a CGI
server, it works the same as an URL command, but it does not allow a second message at end
of event. You may configure up to three preset massages. You can configure a message, but
disable it. This will allow you to keep the settings without using it, which will be useful in testing
and troubleshooting.
To set up Notification Messages, make sure to enable the message and then determine what
type of message to send (HTTP CGI or email).
If you are sending to CGI server, you need to enter the CGI path, the URL command itself, and
an optional message.
If you are sending email, please enter the recipient e-mail address, the email subject, and the
body message.
After changing any of the items above, press
Apply
to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet.
Upload Video/snapshot and Audio
*Pre
‐
requisites:
SMTP
server
/
FTP
server
/
HTTP
CGI
server
setup.
IP devices may send video recording / snapshots to your chosen server upon event. Video will
be in .RAW format, while snapshots will be .JPG files. You can define up to three groups of
settings to upload video/snapshot. Snapshots can be sent to FTP/HTTP CGI, e-Mail, or local
storage (for select models only), while video can only be uploaded to FTP, HTTP CGI servers,
or local storage (for select models). If Audio in is enabled in device, the uploaded video will
include audio.
