Planet Networking & Communication ICA-E5550V User Manual Download | Manualshive

Page: 29 / 81

background image

5 Mega-pixel Vandalproof IR PoE IP Camera

ICA-E5550V

29

After the ActiveX control is installed and run, the first image will be displayed.

If you log in the camera as an ordinary user, setting function will be not available. If
you log in the camera as the administrator, you can perform all the settings provided
within the device.

3.3 Live Viewing

The live view will appear automatically with the video resolution of 1280x720 (1MP cameras)
or 1920x1080 (2-5MP cameras).

While being on the Live View page, the Live View icon appears as being pressed:
If you leave the Live View page, you can later return by pressing that button. The buttons
shown on the Live View page vary depending on the functions supported by the camera.

If the resolution of the PC’s monitor is bigger than the resolution of the live video, you will be
able to see the whole size of the video immediately. If not, you will only see part of the video at
first and you would have to use the scroll bars to see the rest of the video area. In order to see
the whole video on your display, you can temporarily re-scale the video to better fit your screen
by pressing the digital zoom buttons:

- Enlarge the video size digitally

-

Reduce the video size digitally

Notice: These digital zoom adjustments do not influence the actual video resolution of the

«
...
27
28
29
30
31
...
»

Summary of Contents for ICA-E5550V


















































































Reviews:

No comments

Related manuals for ICA-E5550V

WJND400 - NETWORK DISK RECORDER

Brand: Panasonic Pages: 21

Brand: Ganz Pages: 7

Brand: Ganz Pages: 8

Brand: Sakar Pages: 31

ED 14-42mm f3.5-5.66 EZ

Brand: Olympus Pages: 15

ARTCAM-264IMX-BW-WOM

Brand: ARTRAY Pages: 23

Brand: TecnoVideo Pages: 4

Brand: XNET Pages: 23

Brand: ATV Pages: 8

Brand: Uniden Pages: 6

Brand: Wonwoo Pages: 19

Brand: Nauticam Pages: 33

Kasa Smart KC310

Brand: TP-Link Pages: 23

Brand: CueScript Pages: 10

XF10-24mmF4 R OIS

Brand: FujiFilm Pages: 136

Brand: Foxtech Pages: 25

Brand: dji Pages: 67

Brand: zilink Pages: 59

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands