manualshive.com logo in svg

Planet Networking & Communication ICA-E5550V, User Manual

Share
Download
Planet Networking & Communication ICA-E5550V User Manual Download Page 75

 

 

5 Mega-pixel Vandalproof IR PoE IP Camera 

ICA-E5550V

 

 

 

75

3.11.2 System Info 

The 

System Info 

section provides the full information about camera status, settings and log. 

This information is very helpful while doing the camera configuration, maintenance or 
troubleshooting. 

 

 

The 

Server Report

 is a convenient way of exporting the full list of camera related information 

in a text format, so that it can be sent to the technical support team for faster service. 

 

3.11.3 Factory Default 

The 

Factory Default 

section

 

allows the camera settings be reset to the original factory 

settings.  

 

 

If you want to keep network settings and restore other settings to factory default, please select 
the first option. If you select the second one instead, all the settings would be removed during 
factory default. You will have to use factory default IP setting to connect to this camera.   

 

Summary of Contents for ICA-E5550V


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands