User’s Manual of IAP-200x Series
-68-
4.7.1. PoE Configuration
*This option is for IAP-2000PS only.
PoE (Power over Ethernet) Powered Devices:
3~5 watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other Ethernet/non-Ethernet
end-devices to the central where UPS is installed for un-interrupt power system
and power control system.
6~12 watts
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can
install the Access Point any where with no hesitation
10~12 watts
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera without
limits of install location – no need electrician to install AC sockets.
3~12 watts
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet cable into 5/9/12V DC
power output. It frees the device deployment from restrictions due to power
outlet locations, which eliminate the costs for additional AC wiring and reduces
the installation time.
IAP-2000PS is a PoE device of End-span PSE. In this page, you can monitor the power consumption of each
device which is power supplied by IAP-2000PS and configure the related settings of PoE function.
Summary of Contents for IAP-2000PE
Page 1: ......
