Planet Networking & Communication IAP-2000PE, User Manual

Page: 12 / 82

User’s Manual of IAP-200x Series
-11-
The following is the summary table of Reset button functions:
Reset Button Pressed and Released Description
About 1~3 second Reboot the Industrial AP
Over 5 seconds
Reset the Industrial AP to the Factory Default
configuration. The Industrial AP will then reboot and
load the default settings as below:
。
Default Username/Password: admin / admin
。
Default IP address: 192.168.1.1
Subnet mask: 255.255.255.0
2.1.3. LED Indicators
 System
LED Color Function
P1 Green
It indicates the power 1 has power.
P2 Green
It indicates the power 2 has power.
PWR Green
It indicates the machine is power on.
FAL Green
It indicates either the power 1 or power 2 has no
power.
 Wireless LAN
LED Color Function
WPS Orange It indicates WPS is enabled.
WLAN Green
It indicates the wireless LAN is enabled.
SEC Orange
It indicates the wireless security encryption is
enabled.
 10/100Base-TX Ports / 100Base-FX Port
LED Color Function
1 ~ 4 Green
It indicates which RJ-45 port is link up.
FX Green
It indicates the Fiber port is link up. (IAP-2001PE)
PoE Orange
It indicates the device is power supplied by PoE.
PoE
In-Use
Orange
It indicates which RJ-45 port is providing 48V DC
in-line power.