Planet Networking & Communication IAP-2000PE, User Manual

Page: 60 / 82

User’s Manual of IAP-200x Series
-59-
WDS Mode: There are four options, including Disable , Lazy Mode , Bridge Mode , and Repeater Mode .
 Disable
Select Disable to disable the WDS mode.
 Lazy Mode
Figure 4-19
Object Description

WDS Mode:
Select Lazy Mode . The IAP-200X WDS Lazy mode is allowed the other
IAP-200X WDS bridge / repeater mode link automatically.

Phy Mode:
It provides 4 options, including CCK , OFDM , HTMIX , and GREENFIELD .
It provides 4 options, including None, WEP, TKIP, and AES .

Encryp Type:
Lazy Mode Configuration
In the lazy mode, the wireless AP automatically connects to the WDS devices that use the same SSID, channel,
encryption mode, and the physical mode. You do not need to manually enter other MAC addresses of the peer
routers.
To configure the Lazy Mode , do as follows:
Step 1. In the Wireless Distribution System (WDS) page, set the WDS mode to be Lazy Mode.
Step 2. Set the entity model and encryption type to accord with the peer AP (A AP that needs to connect to the
wireless AP by WDS).
Step 3. After finishing the settings, click the Save button to save the settings. The wireless AP will work in the
Lazy mode.
Step 4. Enter the Wireless Security Settings page, and set the security mode of the wireless AP to accord with
the peer router.