46
ADVANCED SET-UP
ADVANCED SET-UP
The
Return Strength Trigger Screw
is used
to adjust the amount of force with
which the trigger is returned to its rest
position. Turn the screw clockwise to
increase the amount of force
(see figure
5.3)
. Do not turn the screw too far or it
will negate the position of the
Front Stop
Trigger Screw
. Turn the screw counter
clockwise to reduce the amount of
force. Do not turn the screw too far
or there will not be enough force to
return the trigger.
Once you have set the trigger to your
preference, refer to setting the
TT BAND
(see page 61), as it is very important
that the
TT BAND
and trigger pull are set
up correctly for the Trigger Transition
Filtering to work correctly.
Figure 5.2
Figure 5.3
Summary of Contents for Eclipseblade E2
