47
ADVANCED SET-UP
ADVANCED SET-UP
THE SET UP MENU
To activate the
SET-UP
Menu, fi rst remove
the three rubber grip screws from
the right hand side of the frame and
peel back the rubber grip to expose
the PCB inside the frame. Press and
hold the
Set-up
pushbutton, which is
located on the PCB above the battery.
Press the
Raise
pushbutton to scroll
up through each of the options on
the menu. Once the fi rst option has
been displayed, pressing the
Raise
pushbutton will cause the last option
to be displayed.
Press the
Select
pushbutton to select
the displayed option.
Selecting
BACK
will return the display to
the Run Screen from which the
SET-UP
Menu was selected.
After one second,
TIMING
will be
displayed - this is the fi rst option on
the
SET-UP
Menu as shown below:
Press the
Lower
pushbutton to scroll
down through each of the options on
the menu. Once the last option has
been displayed, pressing the
Lower
pushbutton will cause the fi rst option
to be displayed.
Summary of Contents for Eclipseblade E2
