USING THE SENSITIVITY
PARAMETER
Having scrolled to the
SENSTIV
option
on the main menu, use the
Select
pushbutton to enter the
SENSITIVITY
option.
Press and release the
Raise
pushbutton
to increase the sensitivity level. Press
and hold the
Raise
pushbutton to increase
the sensitivity level more rapidly.
Press and release the
Lower
pushbutton
to decrease the sensitivity level. Press
and hold the
Lower
pushbutton to decrease
the sensitivity level more rapidly.
Press
Select
to set the sensitivity level at
the displayed level. If you now pressed
either the
Raise
or
Lower
pushbuttons
you would be able to continue
navigating through the main menu.
IMPORTANT
: The sensitivity level must
always be lower than the minimum
reading given by the breech sensor
display for any colour paintball
being used.
The breech sensor sensitivity is
factory set at 50%, which is suitable
for the vast majority of paints.
Only paints with very dark shells or
a non-reflective surface may require
adjustment to the sensitivity level.
USING ECLIPSEBLADE
37
USING E2
Summary of Contents for Eclipseblade E2
