32
USING ECLIPSEBLADE
USING E2
The Main Menu
To activate the Main Menu, press and
hold the
Select
pushbutton. After one
second OFF will be displayed, this is
one of the options on the Main Menu,
as shown below.
Press the
Lower
(bottom) pushbutton to
scroll down through each of the options
on the menu. Once the last option
on the menu has been displayed,
pressing the
Lower
pushbutton will
cause the fi rst option to be displayed.
Press the
Raise
(top) pushbutton to
scroll up through each of the options
on the menu. Once the fi rst option
on the menu has been displayed,
pressing the
Raise
pushbutton will
cause the last option to be displayed.
Press the
Select
pushbutton to select
the displayed option.
Selecting the
Back
option will return the
display to the display from which the
main menu was selected.
Summary of Contents for Eclipseblade E2
