52
b) select
«Delete marker»
command in the right-click menu or click button.
You can adjust the position of the frequency marker in two ways:
a) change the frequency by dragging the marker in the diagram.
Find the marker on the spectrum diagram (you can use
«Show marker»
command).
Move the mouse pointer over the marker, then press and hold left button of the mouse.
Drag the marker to the new position and release the mouse button.
b) change the frequency by direct entering of the frequency value.
Find and highlight the required marker. Then select
«Edit frequency»
command in the
right-click menu. In the drop-down dialogue enter the new value of frequency and click
«OK»
.
To enable the display of markers on the spectrum diagram whether make a double
mouse click on the corresponding marker in the table or select
«Show marker»
command in the right-click menu on the marker panel.
The frequency marker report represents a table containing the marker number,
frequency and the measured level.
To view and print out the marker report, click
«Frequency marker report»
button on
the marker panel. The preview window will appear on the screen. Using this window you
can view the report, add some text comments and print it out (section 4.10.13).
4.10.8.3. Spectrum Analyzer Diagram Saving
The program offers the capability of the spectrum diagram data export into the files of
standard formats. This allows to use these data for pasting into other electronic documents
and perform the calculations.
You can save the spectrum diagram into one of the following three formats:
a) text file (*.txt);
b) comma-separated values file (*.csv);
c) image file (*.bmp).
To save the diagram into a file, proceed as follows:
a) select
«Save as...»
command
in
«Spectrum»
submenu
of the program menu to
open the standard dialogue for file saving;
b) in drop-down list
«Save as type»
select the required file type;
c) enter the file name and select the location of the file to be saved;
d) click
«
ОК
»
of the dialogue.
The
«Save as...»
command can also be accessed through a right-click menu of the
spectrum diagram panel.
4.10.8.4. Spectrum Diagram Report Viewing and Printout
The spectrum diagram report can be represented as a graph of the signal spectrum
measured within the frequency range between the specified frequency limits, or as a table.
To view and print out the report on the spectrum diagram in the form of the graph,
proceed as follows: Select
«Spectrum
/
Report
/
Graph»
in the program menu (this
command you can also access from the right-click menu). The preview window will
appear. Using this window you can view the report, add some text comments and print it
out (section 4.10.13).
To view and print out the report on the spectrum diagram in the form of the table,
proceed as follows: Select
«Spectrum
/
Report
/
Table»
in the program menu (this
command you can also access from the right-click menu). The preview window will
appear. Using this window you can view the report, add some text comments and print it
out (section 4.10.13).
Summary of Contents for IT-088
Page 1: ...IT 088 DIGITAL DVB T SIGNAL ANALYZER OPERATING MANUAL...
Page 2: ...2 31 03 10...
Page 82: ...82...