46
c) RAM requirements depend on the operating system of your PC: 64 MB for Windows
XP/2000, 32 MB for Windows Me/98/NT 4.0. For multi-processor system you will need 16
MB additionally for every extra processor;
d) 5 MB of hard drive free space (15 MB while installation);
e) COM-port,
operating at 19200 baud rate.
f) SVGA monitor and video card of 256 colours and resolution of 640x480 pixels;
g) mouse.
4.10.3. Software Installation
The installation of the required software is executed by
Setup.exe
program, which
performs all the actions necessary for saving of the program to the computer hard drive.
Before installation, close all active applications. If you use Windows NT, 2000 or XP,
you to proceed with installation you should log in under administrator’s rights.
If you are using a CD for installation, place the CD into the disk drive. Press
«Install
ViewIt 1.5»
when the disk menu appears. If you received the software in some different
way, just run the
Setup.exe
file.
After you have started the installation program, the installation wizard window will
appear. Click
«Next»
to initialize installation.
Then select the folder where you want to save the Analyzer program files. By default,
the files are saved into
«C:\Program Files\TV Level Meter\IT-08»
. To save the files into a
different folder, click
«Browse»
button. Select the required path and click
«OK»
.
The following steps will be fulfilled automatically. If everything is correct, the information
window indicating successful installation will appear on the screen. Click
«Finish»
to
complete the installation.
After the installation has been completed, a new folder
«ViewIt 1.5»
containing a
shortcut for accessing the program will be created in the
«Start»
menu.
4.10.4. Starting the Program
Connect the Analyzer to PC using the cable supplied in the package. Switch the power
of the Analyzer on and select in the main menu the mode of operation controlled by PC.
The
icon corresponds to this mode.
Waiting for command
message will be
displayed in the top line of the Analyzer screen. When operating with PC, current
operational information about the commands being performed is displayed on the screen.
To start the program on your PC, select
«Start->Programs->ViewIt 1.5->ViewIt for IT-
08»
in Windows main menu.
ATTENTION
Before you start the program, make sure that your IT-088 is
connected to the computer correctly, the power is switched on, and the
Analyzer is in «Waiting for command» mode. During the first start of the
program, it is necessary to set the COM-port connected to the Analyzer. In
the main menu find
File->Preferences
, select the required COM-port in
the drop-down list and click
«OK».
ATTENTION
The selected port shall be free (not used by some other
application). otherwise the communication with Analyzer will not be
established.
Summary of Contents for IT-088
Page 1: ...IT 088 DIGITAL DVB T SIGNAL ANALYZER OPERATING MANUAL...
Page 2: ...2 31 03 10...
Page 82: ...82...