Planar Dome Md4/PCI Installation Manual Download Page 95

Page: 95 / 162

Installing the Md4/PCI Board in a PC

Uninstalling a dual-headed DOME device

You must uninstall a dual-headed DOME device on a
display-by-display basis. Uninstall the sister device first
and the primary device second.

To uninstall a dual-headed DOME device

1. Right click on the desktop, select Properties ->

Advanced

for the sister device.

2. Click DOME tab ->Uninstall DOME Device button.

You are prompted to restart the computer.

3. Restart your computer.

4. Click Start -> Settings -> Control Panel ->

Administrative Tools

icon.

5. Click Computer Management.

The Systems Tools dialog box appears.

6. Click Device Manager.

7. Click Display Adapters.

The DOME control panel determines if you are
uninstalling the devices in the proper order.

Uninstalling a Dual-Headed DOME Device

Step 1

Use the Uninstall DOME Device button on the DOME
tab to begin uninstalling a dual-headed DOME device.

Step 2

Use the Windows 2000 control panel to complete
uninstalling a dual-headed DOME device.

Once you restart, the sister device no longer appears
in Windows Display Properties.

Summary of Contents for Dome Md4/PCI



































































































































































Search results

Summary of Contents for Dome Md4/PCI

Reviews:

Related manuals for Dome Md4/PCI

Brands by name

Popular brands

Planar Dome Md4/PCI, Installation Manual

Search results

Summary of Contents for Dome Md4/PCI

Reviews:

Related manuals for Dome Md4/PCI

Brands by name

Popular brands