100
Chapter 3
res="1728x2304 @ 69Hz"
This line indicates that your monitor’s resolution (pread-
justed timing name) is 1728x2304 @ 69Hz.
monitor="domegray.vda"
This line indicates that you are using a grayscale monitor,
and the preadjusted timing name is located in the monitor
file
domegray.vda
.
Monitor files are located in the
/opt/DOMEmd4pci/\
monitors
directory. Do not modify these files unless
DOME Customer Support advises you to do so.
board="md4pci-2hd.xqa"
This line indicates that you are using two heads (
-2hd
) of
an Md4/PCI board (
md4pci
), and that the board configura-
tion is located in the board file,
md4pci-2hd.xqa
.
Board files are located in the
/opt/DOMEmd4pci/boards
directory. Do not modify these files.
See the second code sample on page 98 for configuration
for the second head, and the third code sample for configu-
ration for a one-headed system driving a color monitor.
When modifying the
res
line, be sure to use the exact
name for your monitor from the “Preadjusted Timing
Name” column in the Resolutions and Refresh Rates table
on page 138.
To support a color monitor, use
"domecolr.vda"
in
place of
"domegray.vda."
Both heads of the same board must use the same
resolution.
Summary of Contents for Dome Md4/PCI
