74 | Installing the Board and Driver in a Sun PCI Workstation
Installing the PCI Solaris Driver
This procedure assumes that the Solaris 2.5.1 or later operating
system is already installed on your computer. If it is not, refer to
the Sun documentation.
Installing the Md2/PCI driver for your Sun host requires about
500 KB of free space:
• 200 KB in
/kernel/drv
• 100 KB in
/usr/openwin/server/modules
• 200 KB in
/usr/lib
The installation procedure for Solaris performs these tasks:
• Adds the device driver
• Adds the OpenWindows™ loadable DDX driver
• Modifies the
OWconfig
file
• Installs the
DOMEmdlib
shared object library
To install the driver
1.
Log on as
root
.
2.
Insert the DOME Md2/PCI Drivers for Solaris CD into
the CD-ROM drive.
If a previous version of the driver exists on your system,
you must remove it before you install the new package.
To do so, type
pkgrm
and select the
DOMEmd2p
and
DOMEmdlib
packages for removal.
If the
DOMEmdlib
package already installed on the system
is newer than that on the CD, do not remove it.
