Customizing Sync Parameters for Windows NT | 95
Customizing Sync Parameters for Windows NT
If you are using the Windows NT 4.4.0 or later driver,
you can customize sync parameters for the Windows NT
operating system.
1. Open the text sync (
.vid
) file from the
C:\dome\tools
directory.
The
.vid
file for the Md2/PCI board is
Md2PCI.vid
.
2. Save the text sync file.
3. Open a DOS window.
4. Change directory to
C:\dome\tools
.
5. Run the
mdconfig
program from a DOS window to
build the corresponding
.cfg
file.
The program asks you to enter the system
windows directory.
If your customized file contains errors, the display may appear
blank. DOME strongly advises that you always make a backup
copy of the original
.vid
and
.cfg
files before making any
changes to them.
Change individual sync parameters in the text sync file or
add new individual syncs at the end of the file to create
a new mode.
Make sure there are no empty lines at the end of the
.vid
file.
