Configuring Display Settings on Windows NT 4.0 | 49
Using the DOME tab online help
The Windows NT driver (version 4.4.0 or later) provides online,
context-sensitive help for the DOME tab. You can access the help
in either of two ways:
• Click the question mark (?) button on the title bar, then click
the area of the DOME tab with which you need assistance.
• Move the cursor to the area where you need assistance, then
press <F1>.
Changing the resolution and refresh rate
Valid options for resolution and refresh rate are listed in the
Resolution and Refresh Rate field of the DOME tab. Highlight
the desired options.
Setting the screen configuration
Each Md2/PCI board can support either one or two screens.
Highlight the desired number and configuration.
Setting monitor preferences
In the Monitor Preferences section of the DOME tab, you can
select one of these options:
• Sync on Green
• Composite Sync
• Pedestal
If your monitor is set for these options, you should select them
within the DOME tab. Refer to your monitor manufacturer’s
recommendations for more information.
