Installing the PCI Windows NT 4.0 Driver | 43
7.
Insert the WINDRIVER CD and browse to the
winnt4\MdXPCI\4.4.x.yyy
directory (where
x.yyy
denotes secondary version numbers).
8.
Find and select the
oemsetup.inf
file, and click Open.
The Change Display dialog box appears with these choices:
DOME imaging systems Md2/PCI
DOME imaging systems Md4/PCI
DOME imaging systems Md5/PCI
DOME imaging systems Md8/PCI
9.
Select DOME imaging systems Md2/PCI, and click OK.
The Third-party Drivers dialog box appears,
prompting you:
Do you wish to proceed?
10.
Click Yes.
A progress bar appears. Then the Installing Driver dialog box
appears with this message:
The drivers were successfully installed.
11.
Click OK, then Close on the Display Type dialog box and the
Display Properties dialog box.
The System Settings Change dialog box appears,
prompting you:
Do you want to restart your computer now?
12.
Click Yes.
13.
Select Windows NT Workstation Version 4.00 [VGA] when
you restart the computer.
14.
Configure your display settings. See page 44.
