Configuring Display Settings on Windows NT 4.0 | 45
3.
Click List All Modes….
The Detected Adapter dialog box appears.
4.
Select the desired resolution and refresh rate, and
click OK.
5.
Click Test.
The Testing Mode dialog box appears, explaining that
the new mode will be tested.
The dialog box on your screen displays the values that exist
in your binary
.cfg
file, which may be different from the
values displayed in this illustration. For information on
editing these values, see “Customizing Sync Parameters for
Windows NT” on page 95.
Your monitor(s) must be connected to test the resolution
and refresh rate.