PJLink CP-X2021WN, User Manual

Page: 176 / 242

60
• In standby mode, the
POWER
indicator will  ash green for approx. 3
seconds when at least 1 “Power ON” schedule is saved.
• When the schedule function is used, the power cord must be connected to the
projector and the outlet. The schedule function does not work when the breaker
in a room is tripped. The power indicator will lights orange or green when the
projector is receiving AC power.
NOTE
Schedule Settings (
27
)
7.3 Event Scheduling(continued)
Schedule settings can be con  gured from a web browser.
Example
: If the IP address of the projector is set to
192.168.1.10:
1) Enter “ http://192.168.1.10/ ” into the address bar of the web browser, and select
Projector Web Control from the selection window.
2) Enter your user name and password, and then click the [OK] .
3) Click the
[Schedule Settings]
on the main menu and select the required
schedule item. For example, if you want to perform the command every
Sunday, please select the
[Sunday] .
4) Click the
[Enable] check box to enable scheduling.
5) Enter the date (month/day) for speci  c date scheduling.
6) Click the
[Apply] button to save the settings.
7) After con  gure the time, command and parameters, click the
[Register] to add
the new event.
8) Click the >'HOHWH@
button when you want to delete a schedule.
There are three types of scheduling.
1) Daily: Perform the speci  ed operation at a speci  ed time every day.
2) Sunday ~ Saturday: Perform the speci  ed operation at the speci  ed time on a
speci  ed day of the week.
3) Speci  c date: Perform the speci  ed operation on the speci  ed date and time.
7. Other Functions