background image

33

3.1.10 Projector Control

Item

'HVFULSWLRQ

MAIN

POWER

Turns the power on/off.

INPUT SOURCE

Selects the input source.

3,&785(02'(

Selects the picture mode setting.

BLANK ON/OFF

Turns Blank on/off.

MUTE

Turns Mute on/off.

FREEZE

Turns Freeze on/off.

MAGNIFY

Controls the magnify setting. 

In some input signal sources, it might stop “Magnify” even 

though it does not reach to maximum setting value.

MAGNIFY POSITION V

Adjusts the vertical magnify position.

MAGNIFY POSITION H

Adjusts the horizontal magnify position.

TEMPLATE

Turns template on/off.

MY IMAGE

Selects MY IMAGE data.

0<,0$*('(/(7(

Deletes MY IMAGE data.

(continued on next page)

The items shown in the table below can be 

performed using the Projector Control menu. 
Select an item with the mouse.
Most of the items have a submenu. Refer to the 

table below for details.

Controls the projector.

• The setting value may not match with the actual value if the user 

changes the value manually. In that case, please refresh the page by clicking 
the

[Refresh]

 button.

NOTE

3. Web Control

3.1 Projector Web Control (continued)

Summary of Contents for CP-X2021WN



















































































































































































































































Reviews: