PJLink CP-X2021WN User Manual Download

Page: 81 / 242

NETWORK menu

Item

Description

PRESENTATION

Selecting this item displays the PRESENTATION menu.

Use

▲

▼

buttons to select one of the following items, then press

►

ENTER

button to use the function.

• To use Network Presentation, an exclusive application, "LiveViewer"

is required. It can be installed from the bundled application CD.

You can also download the latest version and relevant information

from the Hitachi website (http://www.hitachi-america.us/digitalmedia

or http://www.hitachidigitalmedia.com).For details of Network

Presentation and instructions to install the "LiveViewer", refer to the

manual for "LiveViewer".

QUIT

PRESENTER

MODE

If you set a computer to the Presenter mode while

its image is projected, the projector is occupied by

the computer and access from any other computer is

blocked.

Use this function to quit the Presenter mode and

allow other computers to access the projector.

Select this item to display a dialog.

Press

►

button to choose OK in the dialog.

The Presenter mode is cancelled and a message is

displayed indicating the result.

• To make Presenter mode setting, use “LiveViewer”.

For details, refer to the manual for "LiveViewer".

MULTI PC

MODE

If you set one or more computers to the Multi PC

mode on “LiveViewer” and send their images to the

projector, you can select the display mode on the

projector from two options below.

- Single PC mode: displays the image of the selected

computer on full screen.

- Multi PC mode: displays the images sent from up to

four computers on screen that is divided into quarter

sections.

Select this item to display a dialog.

Use the dialog to change the display mode as

explained below.

• To change from Multi PC mode to Single PC mode,

select one of computers in the dialog using the

▲

▼

◄

►

buttons and press the

ENTER

INPUT

button.

Press the

►

button to choose OK, and then press

ENTER

INPUT

again. The image for the selected

computer is displayed on full screen.
(continued on next page)

(continued on next page)

Summary of Contents for CP-X2021WN



















































































































































































































































Search results

Summary of Contents for CP-X2021WN

Reviews:

Related manuals for CP-X2021WN

Brands by name

Popular brands

PJLink CP-X2021WN, User Manual

Search results

Summary of Contents for CP-X2021WN

Reviews:

Related manuals for CP-X2021WN

Brands by name

Popular brands