PJLink CP-X2021WN User Manual Download

Page: 72 / 242

NETWORK menu

Remember that incorrect network settings on this

projector may cause trouble on the network. Be sure

to consult with your network administrator before

connecting to an existing access point on your network.

Select “NETWORK” from the main menu to access the

following functions.

Select an item using the

▲

▼

cursor buttons on the

projector or remote control, and press the

►

cursor button on the projector or

remote control, or

ENTER

button on the remote control to execute the item. Then

perform it according to the following table. See the

Network Guide

for details of

NETWORK operation.

NETWORK menu

• To use the wireless network function of this projector, the designated

USB wireless adapter that is sold as an option is required. Do not use

any extension cable or device when connecting the adapter to the projector.

• The projector does not allow both wireless and wired LAN to be connected to

the same network.

• Do not set the same network address for both wireless and wired LAN.
• If you are not utilizing SNTP

(

3.1.8 Date/Time Settings

in the

Network

Guide)

, then you must set the DATE AND TIME during the initial installation.

• The network communication control is disabled while the projector is in

standby mode if the STANDBY MODE item of SETUP menu is set to SAVING.

Please connect the network communication to the projector after setting the
STANDBY MODE to NORMAL (

NOTE

Item

Description

WIRELESS

SETUP

Selecting this item displays the WIRELESS

SETUP menu for the wireless LAN.

Use the

▲

▼

buttons to select an item,

and the

►

ENTER

button on the remote

control to perform the item.

MODE

Use the

▲

▼

buttons to select the mode of the

network communication system. Select according

to the settings of your computer.

AD HOC

INFRASTRUCTURE

To save the setting, press the

►

button.

• When ADHOC is selected, IEEE802.11 n cannot

be used.

• If ADHOC is set to MODE while one of WPA-

PSK or WPA2-PSK is selected in ENCRYPTION,

the ENCRYPTION (

) setting switches to OFF

automatically.

(continued on next page)

Summary of Contents for CP-X2021WN



















































































































































































































































Search results

Summary of Contents for CP-X2021WN

Reviews:

Related manuals for CP-X2021WN

Brands by name

Popular brands

PJLink CP-X2021WN, User Manual

Search results

Summary of Contents for CP-X2021WN

Reviews:

Related manuals for CP-X2021WN

Brands by name

Popular brands