manualshive.com logo in svg

PJLink CP-X2021WN, User Manual

The PJLink CP-X2021WN, a powerful projector, comes with a comprehensive User Manual providing detailed instructions for optimal usage. Enhance your viewing experience by downloading the free manual from manualshive.com, empowering you to unlock the device's full potential and unleash captivating presentations effortlessly.

Share
Download
background image

3

ENGLISH

Regulatory notices

About Electro-Magnetic Interference

In CANADA

This Class B digital apparatus complies with Canadian ICES-003.

In the US, and other places where the FCC regulations are applicable

Declaration of Conformity

Trade name

HITACHI

Model Number 

 CP-X2021WN, CP-X2521WN, CP-X3021WN 

Responsible Party

Hitachi America, Ltd.

Address

900 Hitachi way, Chula Vista, CA 91914-3556  U.S.A.

Telephone 1 -800-225-1741

This device complies with part 15 of the FCC Rules. Operation is subject 

to the following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.This equipment has 

been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

INSTRUCTIONS TO USERS:

 This equipment complies with the requirements of 

FCC (Federal Communication Commission) equipment provided that the following 

conditions are met. Some cables have to be used with the core set. Use the 

accessory cable or a designated-type cable for the connection. For cables that 

have a core only at one end, connect the core to the projector.

CAUTION:

Changes or modi

cations not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the 
equipment.

Summary of Contents for CP-X2021WN



















































































































































































































































Reviews:

No comments

Related manuals for CP-X2021WN

Panasonic PT-VW440U Operating Instructions (Functional Manual) preview
PT-VW440U
Brand: Panasonic Pages: 100
ICM Controls ICM530 Installation, Operation & Application Manual preview
ICM530
Brand: ICM Controls Pages: 2
Tripp Lite TLP810NET Specifications preview
TLP810NET
Brand: Tripp Lite Pages: 4
Flash professional LED PAR 64 COB 250W 5xWHITE Mk2 User Manual preview
LED PAR 64 COB 250W 5xWHITE Mk2
Brand: Flash professional Pages: 11
Grandview CB-UY60 Installation Manual preview
CB-UY60
Brand: Grandview Pages: 4
Christie DHD1052 Quick Setup Manual preview
DHD1052
Brand: Christie Pages: 158
Barco Galaxy WARP 10 HB Owner'S Manual preview
Galaxy WARP 10 HB
Brand: Barco Pages: 155
Emerson AccuVar NEMA 4X Features And Benefits preview
AccuVar NEMA 4X
Brand: Emerson Pages: 2
Emerson 500 Series Installation, Operation And Maintenance Manual preview
500 Series
Brand: Emerson Pages: 12
Emerson IE Series Manual preview
IE Series
Brand: Emerson Pages: 12
Emerson Interceptor II TVSS Specifications preview
Interceptor II TVSS
Brand: Emerson Pages: 4
InFocus Work Big IN12 User Manual preview
Work Big IN12
Brand: InFocus Pages: 4
LG CineBeam PH150GX Owner'S Manual preview
CineBeam PH150GX
Brand: LG Pages: 16
Philips Magnavox 8P4844C Specification Sheet preview
Magnavox 8P4844C
Brand: Philips Pages: 2
Philips Magnavox 8P5431C Specification Sheet preview
Magnavox 8P5431C
Brand: Philips Pages: 2
Philips Magnavox 8P4831C Specification Sheet preview
Magnavox 8P4831C
Brand: Philips Pages: 2
Philips Magnavox 7P6030W Specification Sheet preview
Magnavox 7P6030W
Brand: Philips Pages: 2
Philips Magnavox 7P5441C Specifications preview
Magnavox 7P5441C
Brand: Philips Pages: 2

Brands by name

Popular brands

Load more brands