95
Maintenance
(continued on next page)
The air
lter unit of this projector consists of a
lter cover, two kinds of
lters, and
a
lter frame. The new double large
lters system is expected to function longer.
However, please check and clean it periodically to keep ventilation needed for
normal operation of the projector.
When the indicators or a message prompts you to clean the air
lter, comply with
it as soon as possible. Replace the
lters when they are damaged or too soiled.
To prepare new
lters, make contact with your dealer and tell the following type
number.
Cleaning and replacing the air filter
Type number :
UX36761
(Filter set)
1.
Turn the projector off, and unplug the power cord.
Allow the projector to suf
ciently cool down.
2.
Use a vacuum cleaner on and around the
lter cover.
3.
Pick and pull up the
lter cover knobs to take it off.
4.
Use a vacuum cleaner for the
lter vent of the
projector.
5.
Take the
ne meshed
lter out while holding the
lter cover. It is recommended to leave the coarse
meshed
lter in the
lter cover as it is.
7.
Put the
ne meshed
lter on the coarse meshed
one, turning its stitched side up.
8.
Put the
lter unit back into the projector.
When you replace the lamp, please replace the air
lter. An air
lter of speci
ed
type will come together with a replacement lamp for this projector.
Stitched
side
6.
Use a vacuum cleaner on both sides of the
ne
meshed
lter while holding it so it will not be
sucked in. Use a vacuum cleaner for the inside of
the
lter cover to clean up the coarse meshed
lter.
If the
lters are damaged or heavily soiled, replace
them with new ones.
Filter (
ne meshed)
Filter (coarse meshed)
Intake vent
Filter cover
Filter cover knobs
2
7
4
3
