12
Communicaion Port
The following two ports are assigned for the command control.
TCP #23
TCP #9715
Con
gure the following items form a web browser when command control is used.
Port Settings
Network Control
Port1 (Port: 23)
Port open
Click the
[Enable]
check box to open
[Network
Control Port1 (Port: 23)]
to use TCP #23.
Default setting is “Enable”.
Authentication
Click the
[Enable]
check box for the
[Authentication]
setting when authentication
is required.
Default setting is “Disable”.
Network Control
Port2 (Port: 9715)
Port open
Click the
[Enable]
check box to open
[Network
Control Port2 (Port: 9715)]
to use TCP
#9715.
Default setting is “Enable”.
Authentication
Click the
[Enable]
check box for the
[Authentication]
setting when authentication
is required.
Default setting is “Enable”.
Command Control via the Network (continued)
When the authentication setting is enabled, the following settings are required.
Security Settings
Network Control
Authentication
Password
Enter the desired authentication password.
Con
rmThis setting will be the same for
[Network Control Port1 (Port: 23)]
and
[Network Control Port2 (Port: 9715)]
.
Default setting is blank.
Re-enter
Authentication
Password
