7
Offi ceRight™ DI200
Operator Guide (SV41289-OG Rev. C)
5.
Moistener Tank
This tank contains
E-Z Seal
®
solution or water to moisten and
seal envelope fl aps. It slides out to the right for refi lling and has
an oval level indicator window at the front so you can easily
check fl uid level.
6.
Lifting Handles (One Each Side)
Always lift the Offi ceRight™ DI200 using the side handles. DO
NOT lift the machine by any of the feeders or the stacker.
7.
Second Sheet Feeder A2 (Optional)
You can add this feeder to the machine to enable folding and
inserting of a second sheet into the envelope. It functions in
exactly the same way as the standard sheet feeder, A1.
IMPORTANT:
When you use both sheet feeders
A1 and A2 together, always load the address bear-
ing sheet into sheet feeder A2. If you fail to do this,
the address won’t show in the envelope window.
Always load sheets into feeder A2
face down and
bottom edge fi rst, that is, with the bottom edge of
the sheet furthest into the machine.
8.
Standard Sheet Feeder A1
This feeder enables folding and inserting of a sheet into the
envelope. Always load sheets into this feeder
face down and
bottom edge fi rst.
9.
Manual Feeder M
Use this feeder to manually feed stapled sets of
up to three
sheets each. The machine waits for you to feed each set by
hand into this feeder before it folds and inserts the set automati-
cally. Always feed sheets into this feeder
face down and bottom
edge fi rst, that is, with the bottom edge of the sheet furthest into
the machine.
10. Stacker
The machine delivers fi nished pieces to this area.
11.
Front Cover D Release Button (Blue Button Marked D)
Press this button to release the front cover if a jam occurs in
this area of the machine. The display prompts you if you need to
open this cover to remove jammed material.
12.
Envelope Feeder B
This feeder feeds envelopes into the inserting area where they
are fi lled with sheets or inserts from other feeders.
Introduction
