13
Offi ceRight™ DI200
Operator Guide (SV41289-OG Rev. C)
Always fan (aerate) envelopes
before you load them. This
prevents them from sticking
together.
Then tap the stack of envelopes
onto a fi rm surface to align the
edges.
IMPORTANT:
Load envelopes right way up and
facing you. This means that the
envelope fl ap is on the back of
the envelope and at the top. Any
other orientation will prevent the
machine from inserting properly.
Place the envelope stack into
Feeder B
with the back envelope
fl at against the feed belts. There’s
no need to “shingle” or stagger
the envelope stack.
Slide the two side guides up to
the envelope stack then
slightly
back them off. Use the blue
handles at the rear of the guides
when moving them.
The correct setting is achieved
when the guides control the
envelopes but in no way restrict
their feed into the machine or
cause them to feed at an angle
(skew).
IMPORTANT:
If the guides are too tight, envelopes may not feed
reliably; if the guides are too loose, envelopes may skew as they feed
into the machine.
Loading
Loading the Envelope Feeder (Feeder B)
