33
Offi ceRight™ DI200
Operator Guide (SV41289-OG Rev. C)
Press the
Menu/Enter button
repeatedly until the screen displays:
Move address in window?
Press
yes
( ) to enter the function.
The screen displays:
Shift...X
(where X is the current setting)
Set the desired number using the
yes
( ) and
no
( ) buttons. When
you reach the setting you want, press the
Menu/Enter button to
confi rm it. This takes you to the next menu option.
Run another trial piece and check it. If the address is centered in the
window, press
Start
to run your job. If the address is not centered,
repeat the procedure until you get the result you want.
Pressing
no
( ) when you have the option to move the address in
the window takes you to the next menu option.
This option lets you turn the sheet feeder(s) double document
detection on or off.
When turned on…
The machine stops automatically
when it senses a double feed (two
sheets feed when only one should).
If you’re running a job with individually addressed inserts, it’s best to
turn double detection on.
When turned off…
The machine ignores any double feeds that may occur. You may want
to turn double detection off if you’re running a mail job and it is of
little concern if a mail recipient receives duplicate sheets.
Press the
Menu/Enter button repeatedly until the display shows the
sheet DD status:
Sheet DD is On (Off). Change?
Press
yes
( ) to change the sheet double detect status. The display
will confi rm the change. Press
no
( ) to go to the next menu option
without changing this setting.
Sheet DD is
On. Change?
The Menu
Sheet Double Detect On/Off
Move address
In window?
Shift.. X
Down
Up
