4
2
1
3
4
5
6
8
12
11
10
9
7
Insert Feeder C (not fitted on all models)
Use this feeder to add additional inserts to your envelope. Material fed from this
feeder cannot be folded by the inserter. However, this feeder is especially suited
to feeding pre-folded or thicker inserts.
Insert Cover E Release Button (blue button marked E)
Press this button to release the insert area cover if a stoppage occurs in this area
of the machine. The display prompts you if this cover needs to be opened to
access material.
Operating Guide Slot
Store this Operating Guide in the slot provided so that it doesn’t get lost and is
readily available when needed.
Control Panel
This is where you enter commands and where the machine informs you of its
status. Pages 6 and 7 explain what each button does.
1
2
3
4
Machine Identification
Introduction
