2
1. INTRODUCTION
Safety
In some countries the DI200 is supplied with a moulded mains lead and plug. In
other countries, or if the supplied lead is not used, the following information
applies:
1.
An approved mains lead for the country concerned must be used.
2.
As the colours of the wires in the mains lead of this equipment may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:
-
The wire which is coloured green and yellow must be connected to the
terminal in the plug which is marked with the letter “E” or by the earth
symbol or coloured green or green and yellow.
-
The wire which is coloured blue must be connected to the terminal which is
marked with the letter “N” or coloured black.
-
The wire which is coloured brown must be connected to the terminal which
is marked with the letter “L” or coloured red.
3.
The wires in the supplied mains lead are coloured in accordance with the
following code:
Green and Yellow
-
Earth
Blue
-
Neutral
Brown
-
Live
WARNINGS:
THE DI200 MUST BE EARTHED
The socket outlet should be near to the equipment and should be
easily accessible.
If you relocate a DI200 which has the optional Second Sheet
Feeder A2 installed, remove it from the Second Sheet Feeder first.
Make sure it fully disengages from the feeder as it is lifted clear.
Obtain help if necessary.
To comply with health and safety standards, operators must observe all local
standard safety precautions relating to the operation of office equipment. In
particular, DO NOT remove covers from the machine. Refer all servicing to
qualified personnel.
Keep hands, jewellery, ties, long hair, etc. away from moving parts.
!
Safety
