30
Press
Menu/Enter repeatedly until the
screen displays…
Press
yes (
) to enter the function.
The screen will display:
(where X is the current setting)
Set the desired number using
yes ( ) and no ( ), then press Trial Piece to run
another trial piece.
If the address is now centred in the window, press
Start and run your job. If the
address is not in the correct position, repeat the procedure until you get the result
you want.
Pressing
no (
), when given the option to move the address in the window, takes
you to the next option.
Sheet double detect on/off
Allows you to turn the sheet feeder(s) double detection (Sheet DD) on or off.
When turned on…
The machine stops if it senses a double feed (two sheets feeding when only one
should). If you’re running individually addressed sheets, it’s best to turn double
detect on. The double detect feature is automatically calibrated for the sheets as
you run a trial piece.
When turned off…
The machine ignores any double feeds that may occur. You may choose to turn
double detect off if you’re running a mail shot and it’s of little concern if one
recipient receives duplicate sheets.
Press
Menu/Enter repeatedly until the
display shows the Sheet DD status:
Press
yes (
) to change the sheet double detect status. The screen will confirm
the change.
Press
no (
) to go to the next menu option leaving this setting unchanged.
Move address
Move address
Move address
Move address
Move address
In window?
In window?
In window?
In window?
In window?
Shift.. X
Shift.. X
Shift.. X
Shift.. X
Shift.. X
Down Up
Down Up
Down Up
Down Up
Down Up
Sheet DD is
Sheet DD is
Sheet DD is
Sheet DD is
Sheet DD is
On. Change?
On. Change?
On. Change?
On. Change?
On. Change?
The Menu
