12
Loading the Insert Feeder (Feeder C)
The Insert Feeder C is only available on certain model configurations. Use this
feeder to add additional inserts to your envelope that do not require folding by the
inserter. This feeder is especially suited to feeding pre-folded or thicker inserts
such as Business Reply Envelopes or Response Cards, etc.
Tap the stack of inserts onto a firm surface
to align the edges.
Place the insert stack into Feeder C.
IMPORTANT:
The orientation of the insert stack will
depend on the nature of the material being
run. For pre-folded inserts it’s normally best
to load with the ‘closed’ edge feeding first.
Business Reply Envelopes can normally be
loaded right way up and facing you.
However, if the flaps are pulled open when
feeding, try loading with the flaps down and
facing you.
Slide the two side guides up to the insert
stack then
slightly back them off. The
correct setting is when the guides control
the inserts but in no way restrict their feed
into the machine.
Use the blue handles at the rear of the
guides when moving them.
Loading
