Pitney Bowes DocuMatch Application Notes Download | Manualshive

Page: 43 / 107

background image

DocuMatch

TM

Integrated Mail System

DocuMatch Application Notes

37

wasted envelopes by finishing any pieces that were in
process before regenerating pieces that were removed due
to automatic jam recovery or operator intervention. Note
that you generally do not need to make this selection for
presorted mail runs. The ZipBreak feature, described on
page 53, is a more efficient way of making sure that all the
pieces end up in the correct tray.

If your job uses selective inserting or incorporates Package
or Tray Break indicators from a Presort package like
SmartMailer, you must check the Document Includes
Control Page box and format your document with a control
page to specify the options for these features. Use of
Control Pages is covered on pages 56 through 62.

In the Report section of the General tab, you can select
reports which are printed at the end of the job. The Job
Summary report shows the configuration of the job, how
many pieces were produced, and how many items were
fed from each of the feeders. The Comprehensive report
shows this information in addition to detailed information
about any stops that occurred during the job. From the
DocuMatch control panel, you can choose which feeder is
used for report printing. When the system is idle and
DocuMatch System Ready is displayed, select System
Options/System Setup/Report Setup and choose the
feeder you want to use. You can also set the date and time
printed on the reports from the control panel. When the
system is idle, select System Options/System Setup/
Date&Time to set the date and time.

You can also specify a Job description, which is displayed
on the control panel while the system runs, during Verify
Setup, and is printed on job reports. The Account number
is ignored in this version, but the system does print it on
the Job Summary report.

Selecting DocuMatch Driver Options, continued

«
...
41
42
43
44
45
...
»

Summary of Contents for DocuMatch












































































































Reviews:

No comments

Related manuals for DocuMatch

Brand: QMS Pages: 160

Brand: QMS Pages: 110

Brand: QMS Pages: 158

Brand: CAB Pages: 144

Brand: Oki Pages: 24

Brand: VAF instruments Pages: 24

Brand: 3DP Pages: 12

Brand: Oki Pages: 222

Brand: Oki Pages: 4

Brand: Oki Pages: 160

Brand: WANHAO Pages: 5

Brand: Wang Pages: 24

Brand: FujiFilm Pages: 37

Brand: Flashforge Pages: 36

Brand: Intermec Pages: 38

Brand: Wasp Pages: 86

Brand: Felix Storch Pages: 46

Brand: Oki Pages: 137

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands