manualshive.com logo in svg

Pitney Bowes DM500, Operator'S Manual, Page: 127 / 200

Share
Download
Pitney Bowes DM500 Operator'S Manual Download Page 127

SV60890 Rev. G  

8-9

DM500™ and DM550™ Digital Mailing System Operating Guide

The Funds Report gives a summary of the funds used and available in the 
meter, total pieces run, batch pieces and value. It prints on one envelope 
or tape.

Screen Display

Funds Report

Funds Used:

<Funds Used>

Funds Available:

<Funds Available>

Total Pieces:

<Total Pieces>

Control Sum:

<Control Sum>

Batch Count:

<Batch Count>

Batch Value:

<Batch Value>

Printed Report

The Funds Report provides the following information:

• 

Date report is printed.

• 

Time report is printed.

• 

Meter Stamp Serial Number.

• 

Used: Postage funds currently spent.

• 

Available: Postage funds still available for processing.

• 

Control Sum: The total of used funds and available funds.

• 

Total Pieces: Total of pieces imprinted with postage.

• 

Batch Value: Postage spent for this batch.

• 

Batch Count: Number of pieces in the batch.

• 

Postage By Phone® Meter Payment System serial number. 

 Funds  Report

Summary of Contents for DM500









































































































































































































Reviews:

No comments