manualshive.com logo in svg

Pitney Bowes DM500, Operator'S Manual, Page: 123 / 200

Share
Download
Pitney Bowes DM500 Operator'S Manual Download Page 123

SV60890 Rev. G  

8-5

DM500™ and DM550™ Digital Mailing System Operating Guide

Multi-Account 
Summary

(External Printer 
Version)

This version of the Multi-Account Summary can only be printed on an at-
tached external printer. Account numbers are only assigned to the lowest 
level of the account hierarchy or transaction level.  Account numbers will 
only appear if the account does not have subaccounts. If the account has 
subaccounts or subsubaccounts, account numbers will only be displayed 
for the lowest level account. The piece and postage totals for accounts 
with subaccounts displays as “Subtotal.”

Screen Display

Account Summary

Account

Pieces

Postage

<Account name>

<Account Piece Count>

<Postage Value Total>

<Account name>

<Account Piece Count>

<Postage Value Total>

Printed Report

The Multi-Account Summary prints out on an attached printer. This report 
provides the following information:

• 

Meter stamp number.

• 

Date report is printed.

• 

Time report is printed.

• Page 

number.

• 

Station ID: a user-defined number to identify the meter.

• 

Number assigned to an account, subaccount, or sub-subaccount.

• 

Name of the account, subaccount, or sub-subaccount.

• 

Total of Items of mail for account, subaccount, or sub-subaccount.

• 

Amount of funds used in account.

• 

Total of funds used for each level of accounts.

• 

The grand total of pieces of mail.

• 

The grand total of the funds used.

Summary of Contents for DM500









































































































































































































Reviews:

No comments