Pitney Bowes DM160i Series, Operator'S Manual

Page: 30 / 112

3-8 SDC974A
3 • Running Mail
Printing Mail
To apply postage to large items of mail and parcels that can't be run
through the machine, use the optional tape sheets. Feed the tape
sheets into the machine the same way you would feed an envelope.
Apply the postage tape sheets to the mail piece or parcel in the
proper location.
1. Select the postage required, account (if accounting is on),
Envelope Messaging and
batch function as described
on pages 3-4 to 3-7.
2. If using the moistener, place
the envelope flap along the
moistener and move the
envelope towards the right.
3. Position the envelope
or tape sheet against the
registration wall of the system
and slide it to the right until the
system grasps it. The system
prints the digital meter stamp
and ejects the envelope/tape
sheet.
Registration Wall
IMPORTANT: Always ensure that your prints are clear
and complete. Poor prints may be rejected by your Postal
Authority. If you notice missing lines in the print as shown
in the illustration, perform a printhead purge as described
on page 7-11 of this guide.
The indicia above is a black and white representation
of the approved Blue indicia. Only Blue Non-
Fluorescent approved ink should be used in the
machine.