Pirelli P.RG F4202N User Manual Download | Manualshive

Page: 155 / 162

background image

150

HBK 939800036-A1

full duplex, 100BASE-TX half duplex, 10BASE-T full duplex, and 10BASE-T half duplex. Auto-negotiation is
defined in the IEEE 802.3 standard for Ethernet and is an operation that takes place in a few milliseconds.

Bandwidth

The information capacity, measured in bits per second, that a channel can transmit. The bandwidth of Ether-
net is 10 Mbps, the bandwidth of Fast Ethernet is 100 Mbps. The bandwidth for 802.11b wireless is 11Mbps.

Category 5 Cables

One of five grades of Twisted Pair (TP) cabling defined by the EIA/TIA-586 standard. Category 5 can be
used in Ethernet (10BASE-T) and Fast Ethernet networks (100BASE-TX) and can transmit data up to
speeds of 100 Mbps. Category 5 cabling is better to use for network cabling than Category 3, because it
supports both Ethernet (10 Mbps) and Fast Ethernet (100 Mbps) speeds.

Channel

Similar to any radio device, the Wireless Cable/DSL router allows you to choose different radio channels in
the wireless spectrum. A channel is a particular frequency within the 2.4GHz spectrum within which the Rou-
ter operates.

Client

The term used to described the desktop PC that is connected to your network.

DHCP

Dynamic Host Configuration Protocol. This protocol automatically assigns an IP address for every computer
on your network. Windows 95, Windows 98 and Windows NT 4.0 contain software that assigns IP addresses
to workstations on a network. These assignments are made by the DHCP server software that runs on Win-
dows NT Server, and Windows 95 and Windows 98 will call the server to obtain the address. Windows 98
will allocate itself an address if no DHCP server can be found.

DMZ

DMZ (Demilitarized Zone) is an area outside the firewall, to let remote users to have access to items on your
network (Web site, FTP download and upload area, etc.).

DNS Server Address

DNS stands for Domain Name System, which allows Internet host computers to have a domain name (such
as pirelli.com) and one or more IP addresses (such as 192.168.10.8). A DNS server keeps a database of
host computers and their respective domain names and IP addresses, so that when a domain name is re-
quested (as in typing “pirelli.com” into your Internet browser), the user is sent to the proper IP address. The
DNS server address used by the computers on your home network is the location of the DNS server your
ISP has assigned.

«
...
153
154
155
156
157
...
»

Summary of Contents for P.RG F4202N



































































































































































Reviews:

No comments

Related manuals for P.RG F4202N

ThunderLAN TNETE100A

Brand: Texas Instruments Pages: 179

Brand: Opengear Pages: 2

Brand: Supermicro Pages: 24

VMG5313-BXB SERIES

Brand: ZyXEL Communications Pages: 2

Brand: National Instruments Pages: 80

Brand: Valcom Pages: 4

Brand: M-system Pages: 4

Brand: Kramer Pages: 56

Brand: Kasda Pages: 39

Brand: netsys Pages: 164

Brand: Spirent Pages: 22

Brand: Vaisala Pages: 32

SteelCentral NetExpress 470

Brand: Riverbed Pages: 140

Brand: ActionTec MI424WR Pages: 3

Brand: Erbauer Pages: 36

Brand: DayTronic Pages: 13

Brand: VERTO Pages: 48

Brand: Patton electronics Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands