Pirelli P.RG F4202N User Manual Download Page 47 | Manualshive

Page: 47 / 162

background image

P.RG F4202N

© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

Network Connections Section

HBK 939800036-A1

41

Encryption Algorithm.

Select between Temporal Key Integrity Protocol (TKIP)

and Advanced Encryption Standard (AES) for the encryption algorithm.

Group Key Update Interval.

It defines the time interval in seconds for updating

a group key.

WPA2

: WPA2 is an enhanced version of WPA, and defines the 802.11i proto-

col.

Authentication Method.

Select the authentication method you would like to

use. You can choose between Pre-Shared Key and 802.1x.

Pre-Shared Key.

This entry appears only if you had selected this authentication

method. Enter your encryption key in the 'Pre-Shared Key' field. You can use ei-
ther an ASCII or a Hex value by selecting the value type in the combo-box pro-
vided.

Encryption Algorithm.

The encryption algorithm used for WPA2 is the Ad-

vanced Encryption Standard (AES).

Group Key Update Interval.

It defines the time interval in seconds for updating

a group key.

WPA and WPA2 Mixed Mode

: WPA and WPA2 is a mixed data encryption

method.

Authentication Method.

Select the authentication method you would like to

use. You can choose between Pre-Shared Key and 802.1x.

Pre-Shared Key.

This entry appears only if you had selected this authentication

method. Enter your encryption key in the 'Pre-Shared Key' field. You can use ei-
ther an ASCII or a Hex value by selecting the value type in the combo-box pro-
vided.

Encryption Algorithm.

The encryption algorithm used for WPA and WPA2 is a

either the Temporal Key Integrity Protocol (TKIP) or the Advanced Encryption
Standard (AES).

Group Key Update Interval.

It defines the time interval in seconds for updating

a group key.

802.1x WEP

: 802.1x WEP is a data encryption method utilizing a statically or

automatically defined key for wireless clients that use 802.1x for authentication
and WEP for encryption. You may define up to four keys but use only one at a
time.

Generate Keys Automatically.

Select this option to generate the encryption

keys automatically rather than entering them manually. The screen will refresh,
hiding the table of keys described below.

«
...
45
46
47
48
49
...
»

Summary of Contents for P.RG F4202N



































































































































































Reviews:

No comments

Related manuals for P.RG F4202N

BB-HGW700A - Network Camera Router

Brand: Panasonic Pages: 10

IES615-2D Series

Brand: 3onedata Pages: 3

Brand: 3One data Pages: 5

Brand: 3onedata Pages: 33

Brand: IBM Pages: 4

Brand: N-Tron Pages: 62

Brand: Zonet Pages: 8

Brand: axing Pages: 52

Media Board D/120JCT-LS-EW

Brand: Dialogic Pages: 2

Brand: BEC Pages: 159

DiamondLink 3201

Brand: Patton Pages: 12

Ezi-SERVOII EtherCAT TO

Brand: Fastech Pages: 108

Brand: Global411 Pages: 15

Brand: ICP DAS USA Pages: 8

Brand: TP-Link Pages: 57

Brand: ADDON Pages: 4

Brand: TP-Link Pages: 113

Brand: VIA Technologies Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands