Pirelli P.RG F4202N User Manual Download Page 100

Page: 100 / 162

P.RG F4202N

HBK 939800036-A1

Advanced Section

FIGURE 12.

Diagnostics Panel

Ping (ICMP Echo).

To diagnose network connectivity, follow these steps:

Click the 'Diagnostics' icon from the 'Advanced' screen in the Web-based
Management. The 'Diagnostics' screen will appear.

Under the Ping (ICMP Echo) section, enter the IP address or URL to be
tested in the 'Destination' field.

Enter the number of pings you would like to perform.

Press the 'Go' button.

In a few seconds, diagnostic statistics will be displayed. If no new informa-
tion is displayed, press the 'Refresh' button.

ARP.

To perform an ARP packet test.

Performing a Traceroute.

To perform a traceroute, follow these steps:

Click the 'Diagnostics' icon from the 'Advanced' screen in the Web-based
Management. The 'Diagnostics' screen will appear.

Under the Traceroute section, enter the IP address or URL to be tested in
the 'Destination' field.

Press the 'Go' button. A traceroute will commence, constantly refreshing the
screen.

Summary of Contents for P.RG F4202N

































































































































































Search results

Summary of Contents for P.RG F4202N

Reviews:

Related manuals for P.RG F4202N

Brands by name

Popular brands

Pirelli P.RG F4202N, User Manual

Search results

Summary of Contents for P.RG F4202N

Reviews:

Related manuals for P.RG F4202N

Brands by name

Popular brands