Pirelli P.RG F4202N User Manual Download Page 98

Page: 98 / 162

P.RG F4202N

HBK 939800036-A1

Advanced Section

- Start. Date and time when daylight saving starts.
- End. Date and time when daylight saving ends.
- Offset. Daylight saving time offset.

If you want the gateway to perform an automatic time update, perform the
following:



Select the 'Enabled' check-box under the 'Automatic Time Update' section.



Select the protocol to be used to perform the time update by selecting wither
the 'Time of Day' or 'Network Time Protocol' radio button.



Specify how often to perform the update in the 'Update Every' field.



You can define time server addresses by pressing the 'New Entry' link on the
bottom of the 'Automatic Time Update' section.

Summary of Contents for P.RG F4202N

































































































































































Search results

Summary of Contents for P.RG F4202N

Reviews:

Related manuals for P.RG F4202N

Brands by name

Popular brands

Pirelli P.RG F4202N, User Manual

Search results

Summary of Contents for P.RG F4202N

Reviews:

Related manuals for P.RG F4202N

Brands by name

Popular brands