SECTION 8
HANDLING, SERV & MAINT
PA-28-181, ARCHER III
8.1 GENERAL (continued)
\VARNI�G
Use only genuine PIPER parts or PIPER
approved parts obtained from PIPER approved
sources, in connection with the maintenance
and repair of PIPER airplanes.
Genuine PIPER parts are produced and
inspected under rigorous procedures to
ensure airworthiness and suitability for use in
PIPER airplane applications. Parts purchased
from sources other than PIPER, even though
identical in appearance, may not have had
the required tests and inspections performed,
may be different in fabrication techniques
and materials, and may be dangerous when
instaUed in an airplane.
Additionally, reworked or salvaged parts or
those parts obtained from non-PIPER approved
sources, may have service histories which are
unknown or cannot be authenticated, may
have been subjected to unacceptable stresses
or temperatures or may have other hidden
damage not discernible through routine visual
or nondestructive testing. This may render the
part, component or structural assembly, even
though originally manufactured by PIPER,
unsuitable and unsafe for airplane use.
PIPER expressly disclaims any responsibility
for malfunctions, failures, damage or injury
caused by use of non-PIPER approved parts.
REPORT: VB-2749
8-2
ISSUED: December 22, 2017
•
•
•