Pioneer VSX-LX303 Instruction Manual Download Page 133

Page: 133 / 157

133

≫

≫

≫

≫

≫

≫

Firmware Update

Updating Function on This Unit

This unit has a function to update the firmware (system software) via network

or USB port. This function can improve various operations and add various

functions.

• For the latest information on updates, visit our company's website. If there is

no update available, updating the firmware of this unit is not necessary.

• Before updating, make sure that the speaker setup microphone is not

connected.

•

While updating the firmware, do not do the following:

–

Disconnecting and reconnecting cables, USB storage device, speaker

setup microphone or headphones, or performing operations on the unit

such as turning the power off

– Accessing this unit from a PC or smartphone using their applications

•

The update may take approx. 20 minutes to complete via network or via USB

port. Existing settings are guaranteed in either updating method.

When this unit is connected to the network, notifications of firmware updates may

be displayed. To update the firmware, select "Update Now" with the cursors on

the remote controller, and press the ENTER button. The unit automatically enters

standby mode after "Completed!" is displayed, and the update is completed.

Disclaimer

: The program and accompanying online documentation are furnished

to you for use at your own risk.

Our company will not be liable and you will have no remedy for damages for

any claim of any kind whatsoever concerning your use of the program or the

accompanying online documentation, regardless of legal theory, and whether

arising in tort or contract.

In no event will our company be liable to you or any third party for any special,

indirect, incidental, or consequential damages of any kind, including, but not

limited to, compensation, reimbursement or damages on account of the loss of

present or prospective profits, loss of data, or for any other reason whatsoever.

❏

Updating the Firmware via Network

(

p134

)

Summary of Contents for VSX-LX303






























































































































































Search results

Summary of Contents for VSX-LX303

Reviews:

Related manuals for VSX-LX303

Brands by name

Popular brands

Pioneer VSX-LX303, Instruction Manual

Search results

Summary of Contents for VSX-LX303

Reviews:

Related manuals for VSX-LX303

Brands by name

Popular brands