Pioneer VSX-LX303 Instruction Manual Download Page 91

Page: 91 / 157

≫

≫

≫

≫

≫

≫

DTS:X

This mode faithfully reproduces the sound design recorded in the DTS:X audio

format.

The DTS:X audio format is a combination of the mixing method based on

traditional channel based formats (5.1ch and 7.1ch) and object based dynamic

audio mixing, and it is characterized by the precise positioning of sounds and the

ability to express sound movement.

• To enable transfer of this audio format, connect via an HDMI cable and set

audio output on the player to Bitstream output.

ES Discrete (DTS-ES Discrete)

This mode faithfully reproduces the sound design recorded in the DTS-ES

Discrete audio format.

DTS-ES Discrete is an optional audio format based on 5.1ch for DVD-Video and

Blu-ray Discs. It is possible to record a maximum of 6.1 channels with a monaural

surround back channel added.

• To enable transfer of this audio format, connect via a digital cable and set

audio output on the player to Bitstream output.

ES Matrix (DTS-ES Matrix)

This mode faithfully reproduces the sound design recorded in the DTS-ES Matrix

audio format.

DTS-ES Matrix is an optional audio format based on 5.1ch for DVD-Video and

Blu-ray Discs. A monaural surround back channel is inserted to this format by

matrix encoding. During playback, 6.1 channel-playback is achieved by the matrix

decoder on this unit.

• To enable transfer of this audio format, connect via a digital cable and set

audio output on the player to Bitstream output.

Ent.Show (Entertainment Show)

Suitable for rock or pop music. Listening to music in this mode creates a lively

sound field with a powerful acoustic image, like being at a club or rock concert.

Ext.Mono (Extended Mono)

In this mode, all speakers output the same sound in mono, so the sound you hear

is the same regardless of where you are within the listening room.

Ext.Stereo (Extended Stereo)

This mode is ideal for background music. Stereo sound is played through the

surround speakers as well as the front speakers, creating a stereo image.

F.S.Surround (Front Stage Surround)

In this mode, you can enjoy a virtual playback of multichannel surround sound

even with only two or three speakers. This works by controlling how sounds

reach the listener' s left and right ears.

Mono

In this mode, when the input signal is analog or PCM, the left and right front

speakers output the sound in monaural.

PCM

Mode suitable for playing sources recorded in multichannel PCM.

Rock/Pop

Mode suitable for rock content.

Sports

Mode suitable for sport content.

Stereo

In this mode, sound is output from the right and left front speakers and

subwoofer.

Unplugged

Suitable for acoustic instruments, vocals and jazz. This mode emphasizes the

front sound field image, giving the impression of being in front of the stage.

Summary of Contents for VSX-LX303






























































































































































Search results

Summary of Contents for VSX-LX303

Reviews:

Related manuals for VSX-LX303

Brands by name

Popular brands

Pioneer VSX-LX303, Instruction Manual

Search results

Summary of Contents for VSX-LX303

Reviews:

Related manuals for VSX-LX303

Brands by name

Popular brands