Pioneer VSX-LX303 Instruction Manual Download Page 61

Page: 61 / 157

≫

≫

≫

≫

≫

≫

BLUETOOTH

Playback

You can wirelessly play the audio on a BLUETOOTH-enabled device, such as a smartphone.

Basic Operations

Perform the following procedure when this unit is on.

Pairing

1. When you press the button, "Now Pairing..." is displayed on this unit's

display, and the pairing mode is enabled.

Enable (turn on) the BLUETOOTH function of the BLUETOOTH-enabled

device, and then select this unit from among the devices displayed. If a

password is requested, enter "0000".

•

This unit is displayed as "Pioneer VSX-LX303 XXXXXX". This display can

be changed with the Friendly Name function (

p127

) or the Pioneer

Remote App (can be used with the iOS or Android™).

•

To connect another BLUETOOTH-enabled device, press and hold the

button until "Now Pairing..." is displayed, and then perform step 2. This unit

can store the pairing information of up to 8 paired devices.

• The coverage area is approx. 48´/15 m. Note that connection is not always

guaranteed with all BLUETOOTH-enabled devices.

Playing Back

Perform the connection procedure on the BLUETOOTH-enabled device.

The input on this unit automatically switches to "BLUETOOTH".

Playing the music file.

Turn up the volume of the BLUETOOTH-enabled device to an appropriate

level.

•

Due to the characteristics of BLUETOOTH wireless technology, the sound

produced on this unit may slightly be behind the sound played on the

BLUETOOTH-enabled device.

Pioneer VSX-LX303 XXX

Summary of Contents for VSX-LX303






























































































































































Search results

Summary of Contents for VSX-LX303

Reviews:

Related manuals for VSX-LX303

Brands by name

Popular brands

Pioneer VSX-LX303, Instruction Manual

Search results

Summary of Contents for VSX-LX303

Reviews:

Related manuals for VSX-LX303

Brands by name

Popular brands